Chest-heated ironer VG-1218

Chest-heated ironer VG-1218
  • Description
  • Technical specifications
  • Certificate
  • Technical assistance
Chest-heated ironer VG-1218

WARNING! We would like to draw the attention of our customers that some suppliers of chest-heated ironers offer them at prices significantly lower than those of Vyazma chest-heated ironers misleading consumers by not including many of the functions necessary for high-quality ironing of the ironer set and then offer them as additional options thus selling «bare» ironers. These savings will further negatively affect the quality of ironing and the performance of the ironers. Inexpensive ironers often have a constant (non-adjustable) ironing speed which does not allow you to properly set up for ironing different types of fabric. Uneven heating of the ironing tray leads to deformation, low ironing rate and increased wear of the ironed linen. The roll wrap of such ironers is rigid and consists of a cloth and a cover. As you iron it, it «cakes», decreases in diameter, and hardens. The quality of ironing significantly deteriorates and, at the same time, frequent replacement of the cloth and cover is required.

Vyazemsky Machine Building Plant values its reputation and offers chest-heated ironers in a complete set! The price of ironer VG-1218 includes all the options described below:

ROLL WRAPPING WITH METAL WOOL

Chest-heated ironer VG-1218 has an ironing roll made of carbon steel which does not deform when used. The mangle roll has a multi-layer structure consisting of:

1) metal wool;

2) heat resistant fabric;

3) cover.

This design allows to evenly press the linen to the iron gutter over its entire surface, smoothing out possible inequality; this is relevant including for fabrics with thickenings at the seams, etc.
 A roll wrapping with metal wool is used in the design of its ironers by many Western manufacturers. Thanks to the use of this technology, the quality of ironing on ironing mangle VG-1218 corresponds to the highest world levels.

ADJUSTABLE IRONING SPEED

The electronic control system of mangle VG-1218 provides for step-by-step speed control up to 2.5 m/min (there are three fixed ironing speeds), which allows you to maintain the desired ironing quality for fabrics of different thicknesses - thin fabrics can be ironed at high speed, for dense and folded in half fabrics the speed is reduced to ensure drying of the linen at the outlet

CONTINUOUSLY ADJUSTABLE IRONING TEMPERATURE

Temperature adjustment within the range from 100 to 180 ºС which allows to correctly adjust the mangle for ironing various types of fabrics depending on their composition

EMERGENCY STOP SYSTEM

A special bar will stop the work of the ironer when a larger object approaches which makes the operator's work on the Vyazma mangles absolutely safe

EXTENDED ROLL WRAPPING SERVICE LIFE

At the end of the ironing cycle, the roll can be retracted using the foot pedal which avoids overheating of the roll wrapping fabric. Also, when the ironer is turned off, the roll continues to rotate until the set temperature is reached at which overheating of the fabric roll wrapping is excluded which increases the service life of the wrapping

Item, unit measure VG-1218
Ironing area width, mm 1200
Loading height, mm 890
Roll diameter, mm 180
Roll sheathing Stainless steel wool + non-woven needle-punched heat-resisting cloth + flax cover
Capacity, kg/hour 20*
Ironing speed, m/min 1,25/1,85/2,5
Ironing temperature, 0C 100/140/180
Heating type Electrical
Heating time up to 1800C, minutes, max 20
Rated power, kW electric drive 0,072
heating elements 3.2
Dimensions, mm, max length (depth) 450
width 1380
height 970
Weight, kg, max 105
Specific energy consumption,
kW · hour/kg, max
0,135
Power supply voltage, V 220
Exhaust fan No

Note:

* approximate value for cotton linen with a residual moisture content of not more than 25% at the maximum use of the ironing width

The plant reserves the right at any time and without prior warning to change the designations and technical characteristics of the equipment presented on this website.

Technical assistance

Send a message to service department
oso@vyazma.su
Call the customer service center by phone
+ 7 (48131) 3-47-33,
+ 7 (915) 646-08-08,
+ 7 (915) 646-09-09

Recommended items:

215110 Russia, Smolensk region

Vyazma, 25th October Str., h. 37

Tel: +7 (48131) 3-48-12

E-mail: vmz@vyazma.su

© JSC «Vyazemsky machine-building factory», 2003-2024
Яндекс.МетрикаЯндекс цитирования
© JSC «Vyazemsky machine-building plant», 2003-2024