Flatwork ironer VK-1840/VK-1840P

Flatwork ironer VK-1840/VK-1840P
  • Description
  • Technical specifications
  • Certificate
  • Technical assistance
Flatwork ironer VK-1840/VK-1840P

CHROME PLATING IRONING ROLL

It provides a hard wear resistant and corrosion-resistant roll surface. Smooth and polished chrome plating reduces friction and ensures excellent ironing performance and prevents fabric from sticking to the roll surface

INCREASED IRONING ROLL DIAMETER

The 414 mm diameter of flatwork dryer-ironer VK-1840 further increases the ironing quality due to the larger ironing area and contributes to the increased productivity of the dryer-ironer (speed up to 6 m/min)

NO PRE-DRYING REQUIRED

Straight linen can be ironed immediately after extraction (residual moisture 50%)

INTELLIGENT TEMPERATURE MAINTAINING SYSTEM

The ironing temperature set on the controller display is ensured and maintained with sufficient accuracy in all operating modes. This is achieved by a more sensitive temperature measurement system consisting of two temperature sensors evenly installed along the roll and a differential adaptive heater control system. Now, depending on how the temperature on the roll surface changes, the control system selects one or another heating mode and maintains the set temperature as accurately as possible smoothing out its significant swings («overheating» or «cooling»)

ENERGY SAVING TECHNOLOGIES

Increased productivity of ironing of the flatwork dryer-ironer while reducing the level of energy consumption due to the new design of the electric heaters unit (electric fan heater) which ensures the most efficient transfer of heat from the heaters to the surface of the ironing roll and minimal heat loss for «parasitic» heating of the external and internal parts of the dryer-ironer (stands, facing, panels) due to high-quality heat insulating

CONTINUOUSLY ADJUSTABLE IRONING SPEED

It allows to achieve the optimal ironing result for fabrics of different types and content, as well as the desired ironing quality for fabrics of different thicknesses - thin fabrics can be ironed at high speed, for thick and folded products the speed is reduced to ensure drying and ironing of the linen at the outlet. Ironing speed and temperature indication on the controller panel. Wider range of adjustable ironing speed (1 to 6 m/min) than previous generation dryer-ironers

PRESS ROLL WITH SOFT WRAP

It provides a tight pressing of the fabric to the surface of the ironing roller, smoothes the transverse and longitudinal folds on the linen significantly improving the quality of ironing

POWERFUL INTEGRATED STEAM FAN

It removes evaporated moisture from the ironing zone into the ventilation system of the laundry

HIGH QUALITY NOMEX TAPES

The ironing belts are made of heat-resistant and durable reinforced material from NOMEX and Meta Armid fibers, and the feed conveyor tapes are made from reinforced material from NOMEX fibers. Tapes are of high quality and long service life

FLUOROPLASTIС STRIPPERS

The linen is ideally and carefully separated from the ironing roller at the exit from the ironing zone, in case of sticking (due to overheating, the presence of steeping in the fabric, etc.), and is directed to the receiving tray. They do not damage the chrome-plated roll surface.

NEW IRON ROLL INSTALLATION SYSTEM

The roll is installed on 4 «independent», freely rotating support rollers, which makes its rotation free, without jamming, and the operation of the dryer-ironer is less noisy

EMERGENCY MANUAL DRIVE IN CASE OF POWER SUPPLY LOSS

It allows you to remove linen from the ironing area and protect the ironing tapes from damage if an emergency power failure occurs during operation and the heated up ironing roller stops rotating due to of the conveyor drive stop

AUTOMATIC OPERATOR'S HAND PROTECTION AND SHORT-TIME STOP/REVERSE OF THE CONVEYOR

There is a protective panel («safety panel») at the linen inlet from the feeding table to the ironing zone which will stop the tapes movement in case of careless contact with the operator's hands or crumpled, not straightened linen. A special pedal is provided in the lower part of the dryer-ironer, when pressed with the foot, the conveyors will also stop that it might be necessary to straighten the folds when loading the laundry. In this case, a sound signal will warn that a long stop is unacceptable. The same pedal turns on the reverse of the tapes movement, if it is necessary to reload the not straightened linen that has already been ironed.

EASY AND MAINTENANCE-FRIENDLY DRYER-IRONER

Easy access to all service points of the dryer-ironer is provided, complete disassembly of the main units is not required even for routine repairs. Simplified maintenance of the bearing systems of the conveyor rolls due to the use of purchased units with a built-in lubrication system. The interservice operational life has been increased due to the use of high-quality components and higher accuracy in the manufacture of assemblies and parts

Item, unit measure VK-1840 VK-1840P
Ironing area width, mm 1800
Loading height, mm 1000
Ironing roll (cylinder) diameter, mm 414
Ironing roll (cylinder) With chrome plating
Capacity, kg/hour 50*
Ironing speed, m/min 1-6 
Ironing surface temperature, 0C (adjustable) 80-180 80-160
Preheating time to operational temperature, min 30
Heating type Electrical Steam 
Rated power, kW electric drive 0,37
fan electric motor drive 0,37 
heating elements 25,2 -
Dimensions, mm,
max
length (depth) 1025 1035 
width 2330 
height 1225 
Weight, kg, max 630 
Specific energy consumption, kW · hour/kg, max 0,51 0,01
Power supply voltage, V 380 

Note:

* approximate value is obtained  for reference cotton linen with a residual moisture content of not more than 50% at the maximum use of the ironing width

The plant reserves the right at any time and without prior warning to change the designations and technical characteristics of the equipment presented on this website.

Technical assistance

Send a message to service department
oso@vyazma.su
Call the customer service center by phone
+ 7 (48131) 3-47-33,
+ 7 (915) 646-08-08,
+ 7 (915) 646-09-09

Recommended items:

215110 Russia, Smolensk region

Vyazma, 25th October Str., h. 37

Tel: +7 (48131) 3-48-12

E-mail: vmz@vyazma.su

© JSC «Vyazemsky machine-building factory», 2003-2024
Яндекс.МетрикаЯндекс цитирования
© JSC «Vyazemsky machine-building plant», 2003-2024