Flatwork ironer VK-2800/VK-2800P

Flatwork ironer VK-2800/VK-2800P
  • Description
  • Technical specifications
  • Certificate
  • Technical assistance
Flatwork ironer VK-2800/VK-2800P

Through-type dryer-ironers VK-2800 are designed for ironing linen with residual moisture up to 50%.

Model VK-2800 is produced in two versions: with steam and electric heating. Automatic control is carried out by a microcomputer whereby it is possible to set different programs for processing linen depending on the fabric type. A forward and reverse switching mechanism is used, as well as an exhaust device to remove moisture

Item, unit measure VK-2800 VK-2800P
Ironing area width, mm 2800
Cylinder diameter, mm 800
Capacity, kg/hour 105* 170*
Ironing speed, m/min 0-6 0-10
Heating type Electrical Steam
Rated power, kW electric drive 0,55
electrical heaters, 26.4 -
Dimensions, mm,
max
length (depth) 1540
width 3850
height 1390
Weight, kg, max 1800
Working steam pressure, MPa - 0,4-0,6
Steam consumption, kg/hour   150
Nominal inlet parameters for steam supply, DN - 25
Nominal inlet parameters for condensation drainage, DN - 15
Power supply voltage, V 380 220

Note:

* approximate value is obtained  for reference cotton linen with a residual moisture content of not more than 50% at the maximum use of the ironing width

The plant reserves the right at any time and without prior warning to change the designations and technical characteristics of the equipment presented on this website.

Technical assistance

Send a message to service department
oso@vyazma.su
Call the customer service center by phone
+ 7 (48131) 3-47-33,
+ 7 (915) 646-08-08,
+ 7 (915) 646-09-09

Recommended items:

215110 Russia, Smolensk region

Vyazma, 25th October Str., h. 37

Tel: +7 (48131) 3-48-12

E-mail: vmz@vyazma.su

© JSC «Vyazemsky machine-building factory», 2003-2024
Яндекс.МетрикаЯндекс цитирования
© JSC «Vyazemsky machine-building plant», 2003-2024