«LOTUS» washing machine L-30/L-30P
- Description
- Technical specifications
- Certificate
- Technical assistance
Washing machines are designed for washing, rinsing and extracting linen. By special order, it is possible to manufacture a model with a combined heating method (electric + steam). Machines of L-30 series in addition to washing have lay-out and intermediate extraction modes. This allows to improve the staff working conditions and the condition (less dampness) of the laundry. Effluents is drained and steam and foam are removed outside the machine, directly into the sewerage and exhaust system respectively. It is recommended for use in laundries, hotels, hostels, medical institutions (maternity hospitals, hospitals, clinics), kindergartens, nursing homes, residential schools, health and recreation centers, restaurants, military units, etc., as well as in communal and self-service laundries
| Item, unit measure | L-30 | L-30P | |
|---|---|---|---|
| Rated loading capacity, kg, max | 30 | ||
| Geometric volume of the inner drum, dm3 | 300 | ||
| Inner drum: diameter x depth, mm | 902х466 | ||
| Loading height, mm | 570 | ||
| Inner and outer drum | Stainless steel | ||
| Facing* | Painted steel | ||
| Technological process control type | Manual | ||
| Separation factor (G-factor) | during washing | 0,7-0,85 | |
| during extraction | 10 | ||
| Drum rotation frequency, rpm | during washing | 37-41 | |
| during extraction | 141 | ||
| Residual moisture, %, max | 110 | ||
| Heating type | Electrical | Steam | |
| Rated power, kW | electric drive | 1,4/1,5/2,12 | |
| heating elements | 30 | - | |
| Dimensions, mm, max | length (depth) | 1160 | |
| width | 1130 | ||
| height | 1535 | ||
| Weight, kg, max | 550 | ||
| Specific consumption | |||
| Specific energy consumption, kW · hour/kg, max | 0,5 | 0,06 | |
| Specific water consumption, dm3/kg, max | 30 | ||
| Specific steam consumption, dm3/kg, max | - | 0,9 | |
| Requirements for supply lines | |||
| Nominal pipe size of cold and hot water valves, mm | 25 | ||
| Nominal inlet parameters of steam valve, mm | - | 15 | |
| Outlet section of drain connection, mm | 65 | ||
| Cold and hot water pressure, MPa | 0,2-0,4 | ||
| Working steam pressure, MPa | - | 0,2-0,4 | |
| Power supply voltage, V | 380 | ||
Note:
* on special order, the facing can be made of stainless steel
The plant reserves the right at any time and without prior warning to change the designations and technical characteristics of the equipment presented on this website.
Technical assistance
| Send a message to service department oso@vyazma.su |
Call the customer service center by phone + 7 (48131) 3-47-33, + 7 (915) 646-08-08, + 7 (915) 646-09-09 |
